Non hazardous concrete retarding concentrate to produce exposed aggregate finish on freshly poured concrete.
Suitable for use in summer or winter on horizontal surfaces such as
Typical coverage 4m² /L
Penetration trial should always be conducted prior to application.
Code | Item | Pack |
---|---|---|
13727 | BestChem - Agrispose Concrete Retarder 20L | 20L |
Using a garden sprayer to evenly apply the product onto freshly laid concrete. Apply Agrispose as soon the “Bleeding” has finished but before the concrete has set. Please note that the “bleed water” should be removed prior to applying Agrispose to prevent dilution of the product. Care must also be taken to protect the freshly treated surface from direct sunlight, warm winds or conditions that can cause the product to dry out.
Once the product has been applied, allow the concrete slab to partially cure for 2 to 12 hours (curing times vary greatly) and then broom and wash off top layer of concrete paste and Agrispose to expose the underlying aggregate. Care must be taken to ensure that Agrispose paste is removed within 2 -12 hours as the Agrispose will only retard the setting of the concrete for up to 24 hours and the concrete will set as normal to full strength otherwise.