CCS Streetscape Sealer

  • CCS Streetscape Sealer

Penetrating silane-siloxane sealer designed to improve stain resistance to concrete, masonry, pavers, and porous natural stone from the ingress of water.

Water Based
Penetrating
Pack
20L

Available Options

CCS Streetscape Sealer is a waterborne, low VOC (Green Star IEQ-13 compliant), single component, penetrating silane-siloxane sealer designed to improve stain resistance to concrete, masonry, pavers, and porous natural stone from the ingress of water, salts and staining from food and beverages.

CCS Streetscape Sealer also contains fluro-polymers which offer added resistance to staining from oil based contaminants.

These unique fluro-polymers also assist in reducing the staining effects of chewing gum and will make the gum easier to remove from the surface.

Once it penetrates the porous substrate, CCS Streetscape Sealer will produce a hydrophobic surface.

Recommended Uses

  • Concrete or masonry surfaces
  • Footpaths and public walkways
  • Alfresco dining and food eating areas
  • Plain, coloured and decorative concrete
  • Car parks and driveways
  • Porous natural stone (sandstone, travertine, basalt, bluestone, honed marble, exfoliated/flamed granite, limestone, terracotta)
  • Pool surrounds
  • Pre-cast and tilt up panels

Packaging

  • CCS Streetscape Sealer is available in a 20 litre drum.

Coverage Rates

Coverage is approximately 5–7m2  per litre depending on surface porosity. A single flood coat would provide effective treatment in most cases. But multiple wet on wet coats will give greater depth of penetration.

Surface Preparation

  • All surfaces to be treated must be structurally sound and all previous coatings, curing compounds, adhesives, efflorescence or laitance should be removed by abrasive blast cleaning, high pressure water washing or mechanical scrubbing.
  • Any dirt, grease, oil or other surface contaminants should be removed using CCS HD Degreaser.
  • Repair any holes, non-structural cracks and other surface deformities the concrete.
Base Water Based
Finish Natural
Coverage (/Coat) 5 - 8M²/L
Recommended Wait Time for First Coat 28 Days
Recommended Coats 2+ Coats
Recoat Time Wet on wet - do not apply further coats once dried
Application Method Low pressure sprayer, microfibre
Tech Data Sheet
Technical Data Sheet
Safety Data Sheet
Safety Data Sheet


If you have any questions please ask us
Subscribe to our newsletter