Cementaid Rokite PR

  • Cementaid Rokite PR

Anti stain & corrosion resistant impregnation and sealer for protecting and beautifying new or old concrete floors.

Made in Australia

Available Options

Anti stain & corrosion resistant impregnation and sealer for protecting and beautifying new or old concrete floors. Eliminates dusting and seals surface to resist staining and corrosion from a range of oils, grease, fats, lubricants, sugars, lactic acids, soft drinks, mildly acidic or caustic solutions, etc.

How to specify:

All floor surfaces (specify areas) when clean, dry, and at least 14 days old shall be impregnated to resist corrosion and staining using Cementaid ROKITE PR applied by brush, short-nap lambswool roller or low-pressure spray at the rate of 1 litre per 5 – 6 square metres, strictly in accordance with manufacturer's instructions for ensuring complete penetration.

Note:

For floors subject to heavy traffic and / or acidic solutions, it is strongly recommended that DIAMITE Case Hardening & Dustproofing Liquid be applied prior to the above, for increased resistance against abrasion-wear and chemical attack. Where a non-slip, high-traction surface is especially important, use Cementaid CALGRAINS trowelled into the surface of new concrete during placing and finishing. For existing floors where additional traction / anti-slip is required, specify ROKITE PR Non-Slip Grade.

Effects:

ROKITE PR contains a unique blend of toughened plastic and rubber resins in a penetrating solvent. ROKITE PR penetrates the concrete surface and seals pores to a depth of up to 3mm or more, leaving a tough, durable and fully trafficable wearing-surface. Dusting is completely eliminated. Grease, oil, food spillage’s etc. simply wipe or hose off. Minimises cleaning time & costs. Staining or attack by a wide range of materials is resisted, and absorption of food materials that convert to acids by bacterial or enzyme action is greatly restricted. Effective life - 2 to 3 times greater than similar, untreated surfaces. Improves colour, depth and appearance. Fast drying & easy to maintain.

Also available in a range of colours, Colour ROKITE PR is the ideal hard-wearing and cost-effective treatment for colouring and beautifying concrete floors. See separate Data Sheet for Colour ROKITE PR. Drying time (light foot-traffic only) - 1 to 2 hours. No vehicle traffic for minimum 24 - 48 hours.

Tech Data Sheet
Technical Data Sheet
Safety Data Sheet
Safety Data Sheet


If you have any questions please ask us
Subscribe to our newsletter