A fast curing two component chemical fastener based on synthetic resins for anchoring threaded studs, reinforcing bars and starter bars into solid and hollow substrates.
A fast curing two component chemical fastener based on synthetic resins for anchoring threaded studs, reinforcing bars and starter bars into solid and hollow substrates.
Widely used for anchoring into surfaces such as concrete, brickwork, hollow stone. for solid fastening of window frames, roller blinds, banisters and railings, hinges, guard rails, brackets.
Drill the correct size hole, clean out the hole by brushing out or blowing with compressed air. inject the resit into the hole filling approximately on third the hole depth. the first 10 cm of resin should not be used due to insufficient mixing. insert the stud and move back and forth ensuring that the resin overflows around the bolt. after cure time the both can be tightened. for best results only fully tighten after 24 hours.
