Lano-Form Release Agent

  • Lano-Form Release Agent

Derived from natural, sustainable ingredients. Ready to use Formwork, Precast, Tilt Panel Concrete Release Agent

Made in Australia
Easy to Use
Biodegradable
Item Code
See Availability Tab
Pack
Drum 20L, 205L

Available Options

Features

  • Non DG
  • Ready to use
  • Safe on rubbers and polystyrene
  • Non staining
  • Compatible with most coating systems

Contents

Lanolin (a natural product), blended with an evaporative carrier & surfactant. Mixes with water.

Usage Examples

  • Concrete release agent for formwork, precast and tilt panel
  • For use on form surfaces including steel, timber, plywood, plastic & fiberglass
  • Bond breaker
  • Excellent performance with specialised and geo-polymer concrete
  • Extends the life of timber and metal moulds
  • Protection of equipment from concrete and paint overspray
  • Can be used to lubricate and protect jacks & fittings
  • Safe for environmentally sensitive areas and waterways
Code Item Pack
14604 Lano-Form Release Agent 20L 20L
15165 Lano-Form Release Agent 205L 205L

Preparation:

  • Shake 20L container before use or decanting
  • Agitate 200L drum with mechanical stirrer or air hose system before use or decanting
  • Ensure form surface is clean and dry
  • Product is ready to use, no dilution is required
  • Product can be decanted into spray applicators.
  • Good quality applicators are recommended for a fine, even coverage
  • Lano-Form can be applied after setting polystyrene block outs

Application:

  • For best results it is recommended that Lano-Form be applied by spray application
  • Coverage rate is approximately 20-25m² per litre
  • Only a very fine mist is required
  • For formwork, ensure a light and even coverage. Only one coat is required
  • No cleaning required between pours, simply spray, pour, strip and repeat
  • When using as a bond breaker, apply to the top of cured panel in 2 even diagonal opposing coats.
  • In extreme heat, the panels can be sprayed with water before Lano-Form is applied, this reduces the amount of Lano-Form absorbed by the cured panel

Storage & Transport

  • This product is classified as non-Dangerous Goods
  • Store in a cool, dry place
  • Shelf life is approx. 2 years from manufacture date (See Best Before date label on container)
Tech Data Sheet
Tech Data Sheet
Safety Data Sheet
Safety Data Sheet


If you have any questions please ask us
Subscribe to our newsletter