MasterFinish 222 is a low viscosity, chemical release agent for all types of concrete formwork.
Recommended uses
- Use on all types of formwork to enable clean stripping of forms and provide excellent architectural finishes.
- Use in all concrete construction whether "in situ", precast or prestressed.
- Application to wheelbarrows, trowels, buckets and other construction tools to facilitate cleaning and provide temporary protection against rusting.
- Application to metal window and door frames to prevent adhesion of cement and mortar splashes during construction
What makes MasterFinish 222 a unique solution?
MasterFinish 222 reacts with the alkalis and water at the interface of the concrete and formwork to produce a thin film of lime soap which breaks the bond enabling the formwork to be readily stripped.
What are the benefits of MasterFinish 222?
- No discolouration or blotchiness, provides stain-free, "off-form" architectural concrete finishes
- High coverage rate MasterFinish 222 is economical to use
- Suitable for use with normal, off-white and coloured concrete
- Leaves no residue on concrete finish
- Excellent "off-form" finish - produces a clear reproduction of formwork texture and sharp concrete features
- Reduces the incidence of air pockets and tendency of surface spalling at corners
- Will not impair the bond of subsequent applications of paint, render or tiles
- Preserves and waterproofs timber forms and inhibits rusting of steel forms in use or storage
- Protects aluminium windows and door frames from plaster and mortar splashes
- Easy to use, requires no mixing on site
Coverage will vary depending on the type of formwork, as a guide:
Type of Formwork |
m² per litre |
Non-absorbent |
30 – 60 |
Smooth plywood or dense grained timber |
20 – 40 |
Porous or rough sawn timber |
16 - 24 |
Tech Data Sheet
Tech Datasheet
Safety Data Sheet
Safety Datasheet