Cementitious polymer modified thin layer fairing mortar. Suitable for levelling uneven surfaces, filling honeycombs and pin holes. It can be used as a topping (render) of up to 3mm thick to face up masonry.
MasterEmaco N 5100 is a concrete-grey, ready-to-use mortar based on hydraulic binders, high grade quartz sands and modified with synthetic polymers. It contains no chlorides or other salts that might cause corrosion or blooming.
MasterEmaco N 5100 is especially suitable for levelling uneven surfaces, filling honeycombs and pin holes. It can be used as a topping (render) of up to 3mm thick to face up masonry.
MasterEmaco N 5100 is an ideal substrate for coatings. It is also used for laying ceramic and concrete tiles, and as a thin bed mortar for the placement of lightweight blocks, insulation boards and hollow masonry units (HMU).
MasterEmaco N 5100 is ideal for thin resurfacing of damaged concrete surfaces, such as in rain damaged slabs and for use in non-moving crack repairs.
A 20kg bag of MasterEmaco N 5100 mixed with 5 litres of water yields 15 litres (0.015m³), therefore material requirement is 5kg/m² @ 3mm thickness.
