Sikalastic 1K

  • Sikalastic 1K

A flexible mortar that is ideal for waterproofing surface

Complies to Australian Standards

Available Options

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Use

  • Protection of concrete surfaces according to EN 1504-9, principles 1: protection against penetration (coating); 2: control of moisture (coatings); and 8 increasing resistivity (coating)
  • Waterproof protection of concrete structures including tanks, basins, pipes, etc.
  • Waterproofing external wall surfaces to be backfilled in ground
  • Internal waterproofing of walls and floors, in basements
  • Waterproofing of terraces and balconies over concrete or prepared existing tiles
  • Flexible protection coating for reinforced concrete structures against the effects of de-icing salts, freeze-thaw and carbon dioxide swell consolidation.

Characteristics And Advantages

  • Potable water approved according to AS4020:2005
  • Suitable for negative pressure to 25m
  • Can be applied on damp substrates
  • Easy to apply by brush, roller, trowel or spray equipment
  • Good sag resistance and easy to apply, even on vertical surfaces
  • Good crack-bridging properties
  • Very good adhesion on many substrates including concrete, cement mortars, stone, ceramics, bricks and timber
  • Mixing ratio can be adjusted in order to obtain the consistency and workability desired for the intended application

Aprovals & Standards:

  • AS4020:2005 - potable water
  • AS3740 - domestic wet area pending
  • AS4858 wet area membrane pending
  • AS4654 - external waterproofing pending

Colour

  • Light Grey

Packaging

  • 10kg Pail
  • 20kg Bag


If you have any questions please ask us
Subscribe to our newsletter