NuTech EcoSafe Degreaser

Application:

Equipment: Brush or broom application. Plastic watering can, hand sprayer, pump-style garden sprayer or chemical applicator—adequate safety equipment, including gloves and safety glasses.

Preparation: Ensure that all surfaces are dry, and remove all loose material.

Dilution: For oil-contaminated concrete, do not dilute. For general purpose cleaner: 1 part EcoSafe Degreaser to 4 parts water. Adjust as necessary.

Test Area: Test on a small, inconspicuous area. Check the time required and dilution rate. Check the suitability of the substrate.

Application: Apply liberally to the surface and scrub using a broom or brush. Wash off with water. For best results, use a high-pressure washer.

Clean Up: Use generous amounts of water. Wash vertical surfaces from the top down. The best results are achieved with a high-pressure wash.

Suitable Surfaces:

• Asphalt
• Bricks
• Concrete Pools
• Concrete Slabs
• Exposed Aggregate
• Fibreglass Pools
• Metals Surfaces
• Natural Stone

Safety Precautions:

• Avoid ingestion, skin and eye contact. Wear eye protection and rubber or synthetic gloves.
• When applying product using spray applicators wear NIOSH approved respirator. In case of eye or skin irritation, flush with cold water for 15 minutes. If swallowed do not induce vomiting, seek immediate medical attention.
• Dispose of product in accordance with applicable environmental regulations. When using the soap injector line of a pressure washer, be sure to measure dilution ratios according to the setting of the intake valve.