Rugasol C is a liquid retarder for horizontal construction joints and surfaces for use in cooler conditions or low retardation conditions. Rugasol C eliminates the need for sandblasting, hacking and bush hammering, leaving the aggregate unbroken and firmly embedded.
Rugasol C is a liquid retarder for horizontal construction joints and surfaces for use in cooler conditions or low retardation conditions. Rugasol C is an easy to use, economical product applied to obtain a mechanical key for “kicker” joints, renderings and screeds on horizontal surfaces of freshly placed concrete.
Rugasol C eliminates the need for sandblasting, hacking and bush hammering, leaving the aggregate unbroken and firmly embedded. It can be spray applied to horizontal surfaces of freshly placed concrete sections such as:
The retarding compound in Rugasol C combines with cement at the surface and delays the normal hydration on the surface of the concrete (high cement contents and temperatures will reduce the retardation). After retardation has finished, the concrete cures to its full strength.
Stored at temperatures between 5°C and 35ºC in unopened original containers, protected from direct sunlight and frost, shelf life is at least one (1) year.
| Code | Item | Pack |
|---|---|---|
| 14204 | Sika Rugasol C - Concrete Surface Retarde 10L | 10L |
| 2754 | Sika Rugasol C - Concrete Surface Retarder 205L | 205 L |
| 5632 | Sika Rugasol C - Concrete Surface Retarder 1000L | 1000 L |
Rugasol C is ready to use straight from the container. It should not be diluted. A good uniform coat of the material should be sprayed onto the horizontal concrete surface as soon as the initial bleeding? of the concrete has finished but before initial set. (A garden sprayer is suitable).
Treated surface should be protected from direct sunlight or warm wind, which can cause the surface to dry out rapidly. Proper curing procedures are important to ensure the durability and quality of the concrete.
Once adequate time has elapsed, typically 2-12 hours, depending on the concrete type and ambient conditions such as humidity, temperature and wind, the soft cement paste on the surface can be brushed off and the exposed aggregate finish washed down with clean water. Whilst Rugasol C is in use the concrete surface must be protected from rain, dirt, etc.
Spray equipment should be washed out after use with hot water. Subsequent to removal of paste, proper curing should take place with an efficient curing compound such as Antisol WB, Antisol HR, Antisol AC or Antisol WH.
