Rendacure is a high solids, polymer emulsion specifically formulated for the curing of concrete where after trades are to be applied. The specially selected polymers contained in Rendacure produces a fast drying membrane without the problems of wax or solvent based coatings.
Drying Time @20°C | 30 minutes |
Note: Drying will be quicker in warm weather and on porous substrates
Stir the contents of the drum before application. When using Rendacure as a dust sealer on old concrete ensure the surface is clean and free of oils and other contaminants.
No mixing or dilution is necessary. Use the Rendacure as supplied to ensure optimum results.
For optimum water retention in new concrete apply the Rendacure as soon as possible after the disappearance of any surface water and final troweling. The green fugitive dye assists with obtaining an even coverage.
Apply the Rendacure to the substrate using a brush, roller or spray at 5 sq. m per litre. Avoid letting the membrane pool in any low spots on the floor. Areas which quickly absorb the membrane may require a second coat to adequately seal the substrate. On vertical surfaces apply the membrane as soon as the formwork is removed.
Rendacure is supplied in 20 and 200 litre containers.