The versatile injection mortar for anchorings in masonry and cracked concrete.
The injection mortar FIS V 410 C is a 2-component injection mortar based on vinyl ester for water filled drill holes. It is approved for use in cracked and non-cracked concrete, masonry and for special applications. FIS V is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.
Functioning
- The FIS V 410 C is a 2-component injection mortar based on vinyl ester.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The injection cartridges are quick and easy to use with the fischer dispensers.
- Partially used cartridges can be reused, simply by changing the static mixer.
Advantages
- The FIS V injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications. FIS V is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.
- The extensive range of accessories is ideally suited to the FIS V injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications.
Applications
- Threaded rods
- Internal threaded anchor RG MI
- Injection anchor sleeves FIS H
- Rebar anchor
- Aerated concrete centring sleeve PBZ
- Remedial wall tie VBS 8
- Anchorings in water filled drill holes (only FIS V 410 C).
Approved For Anchorings In:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Hollow blocks made from lightweight concrete
- Hollow blocks made from concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Aerated concrete
- Solid brick.
Also approved for:
- Rebar connections
- Remedial wall tie VBS 8
- Weather facing reconstruction system FWS II
- Stand-off installation Thermax.
