NATURAL SEALER – is a water based repellent & sealant that is used to impart water resistance & surface protection properties to most porous building materials to maintain & preserve the treated materials original appearance & integrity.
NATURAL SEALER also improves the surface slip rating & eliminates or greatly reduces unsightly efflorescence leaching, while providing increased abrasion, cracking & spalling resistance.
NATURAL SEALER is almost invisible, UV resistant, non flammable & environmentally friendly with very low volatile organic content (VOC) so as to supports your regulatory compliance efforts. NATURAL SEALER is Non-SiH, easy to store & handle, easy to ship & vented containers are not required.
NATURAL SEALER may be used with confidence on concrete, liquid limestone, brocks, reconstituted limestone, mortar, render, & grout. NATURAL SEALER may also be used to build hydrophobic qualities into render, Shotcrete, concrete blocks, artificial stones or other building components, & can be admixed during manufacture at level of 0.6 to 6%. Note: NATURAL SEALER is not suitable for sealing dense stone such as marble. DO NOT DILUTE.
Use as received. Apply to clean surface by spraying, rolling or painting. Allow to dry. Once coat is usually sufficient for most surfaces.
COVERAGE: 1 litre treats between 5 to 7 m2 of surface. Coverage rates may vary. NATURAL SEALER when admixed during manufacture of concrete or render should be used at level of 0.6% to 6%.
Base | Water Based |
---|---|
Finish | Natural |
Coverage (/Coat) | 5 - 7M²/L |
Recommended Wait Time for First Coat | |
Recommended Coats | 1 Coat |
Recoat Time | NA |
Application Method | Spraying, rolling or painting |