Masterfinish Poles
Masterfinish poles are widely used for many, brooms floats and trowels, enabling the work to be achieved from a standing position, external from the concrete slab.
Masterfinish poles are widely used for many, brooms floats and trowels, enabling the work to be achieved from a standing position, external from the concrete slab.
Widely used for many floating and finishing jobs, enabling the work to be achieved from a standing position, external from the concrete slab.
The inside tube is grooved. A pin penetrates this groove. This allows the twisting action the operator applies to the handle to be transferred to the floor. The handle length is locked by lightly twisting the collet nut. The 1076 can extend from 2.75 to 5m and the 1067 can extend from 1.23m to 2.43m.
The handle also features removable clip-on steel tube adaptor (part No. 1076E). This allows the operator to unclip the handle from the tool for cleaning, storage or to fit to another tool. Additional adaptor tubes (1076E) may be purchased.
Used as an extension for the 1076 pole. 1076 is inserted into 1086 which is held in place by the collet fitting. Enables telescopic the extend from 2.80m to 7.0m. 1076 is not included.
The aluminum tube is fluted to enhance grip. The inserted end tube is zinc plated steel, swaged down to fit neatly on the shaft of a bullfloat, walking trowel, or broom bracket.
Three or four of these handles may be aligned together to give a reach of 6 to 8 meters. To obtain a 7m reach, a 588 clip handle can be clipped onto the 1076 telescopic handle.
The Masterfinish 1.8m timber Rake Handle fits a range of Masterfinish products where a 588 or 1076 are not applicable.
| Type | Description | Length |
|---|---|---|
| 588 | Multi Fit Clip Handle | 2m |
| 1067 | Telescopic Handle Half Length | 1.32m to 2.43m |
| 1076 | Telescopic Handle | 2.75m to 5m |
| 1086 | Telescopic Handle Extension | 2.80m to 7m |
| RH | Masterfinish Timber Handle | 1.8m |
