NuTech NuCourt Roll Coat

NuCourt Roll Coat is a water-based acrylic coating for roller application on asphalt and concrete sports courts. It delivers a non-slip, weather-resistant finish with excellent durability and surface protection.

• Coloured
• Durable
• Low VOC
• Sports
• Water Based

Description:

NuCourt Roll Coat is a water-based acrylic coating designed for use with a short-nap roller on asphalt and concrete sports surfaces. As part of the NuCourt Sports Surface System, it creates a high-build, slip-resistant finish that performs well in all weather conditions.

This coating is ideal for facilities that require a smooth, durable playing surface. It applies easily with a roller and forms a resilient, UV-stable surface that resists fading, bacteria, mould, and general wear. The result is a long-lasting finish that withstands foot traffic and outdoor exposure.

NuCourt Roll Coat features a low-VOC, water-based formula, making it safer to use and more environmentally responsible than solvent-based alternatives. Its smooth, consistent texture also improves playability and enhances safety by reducing surface irregularities.

For complete system compatibility, pair this product with NuCourt Line Marking for precise, long-lasting line definition. Together, they form a complete solution for professional court resurfacing or new installations.

If you’re looking for a high-performance sports coating that delivers long-term value, this roller-applied acrylic system is built for reliability and ease of use.

Benefit:

• Low VOC
• Specifically designed for hard sports surfaces
• Developed for roller application
• UV stable and non-fading
• Can be line marked with NuCourt Line Marking
• Suitable for all weather conditions
• Excellent protection against bacteria and mould
• High build, smooth surface coating

Application:

Preparation: The surface must be clean and free of all lichen, moss, grease, oil, chewing gum, silicon and other foreign matter.

• Moss and Lichen Contamination: Use Nutech Hypo per the relevant TDS, allowing the surface to dry thoroughly after complete preparation.
• Grease & Oil: Use EcoSafe Degreaser in accordance with the relevant TDS.
• Use a high-pressure water blast (> 2500 PSI) to remove any grease, oil, food, or stains. Allow to dry thoroughly.
• Repair all non-structural cracking and any surface damage. Nutech Paint recommends seeking professional advice regarding any structural or drainage issues prior to the commencement of works.
• Any ponding of water deeper than 20mm will require patch repairing. Where the existing coating has been removed, patch repair the surface using NuCourt Fill Coat in accordance with the relevant TDS.
• For preparation specific to concrete or asphalt surfaces, refer to the TDS.

Application:

• First Coat: Apply one coat of NuCourt Roll Coat. Pour a windrow of NuCourt Roll Coat parallel to the court edge. Apply even downward pressure and avoid leaving thick film sections on either side of the applicator. Walking in the direction of the windrow, spread with the applicator to obtain an even cover, then reverse direction. Always maintain a wet edge. Allow the coat to dry. After the coating is dry, inspect the surface and scrape or grind off any excess lumps or irregularities.
• Second Coat: Apply NuCourt Roll Coat in the above-described method.
• Top Coat Pre-Existing Surfaces: In accordance with the methods described in the TDS
• For Line Marking: Refer to NuCourt Line Marking

Suitable Surfaces:

• Asphalt
• Concrete Slabs

Warnings:

• For preparation guidelines specific to concrete or asphalt surfaces, consult the TDS before application