Void Formers for TKA Edge Lift Anchors

A special rubber oval recess former is used to locate the anchor and to create a void for lifting.

The Liftfix Fixing Screw is used to connect the Liftfix TKA Edge Lift Anchor Recess Former to the formwork.

Special care must be taken when installing the anchor to ensure that the tilt-up anchor and the recess former is installed in the direction of lift.

When the concrete has cured, the recess former is removed and the Liftfix Lifting Clutch can then be attached.

The Liftfix Lifting Clutch is used for edge lifting the element to an upright and for transport or installation.