Reid Lifting Plate 5LP
Typically used in instances where a lifting anchor has been overlooked or missing. Working Load Limit – 5T.
Typically used in instances where a lifting anchor has been overlooked or missing. Working Load Limit – 5T.
Reid Lifting Plates are typically used in instances where a lifting anchor has been overlooked or missing. It is must be used where the load direction is aligned with the cleat and minimal side load is applied.
The Reid Lifting Plate is marked with its rated Working Load Limit – 5T. The Working Load Limit of 5t @20 MPa (when positioned away from an edge) when the lift design is certified by the ramsetreid® Engineering department.
