Masterflow 700

  • Masterflow 700

Multi-purpose non-shrink Class-A, Non Shrink, cementitious grout. It is based on Portland cement

Item Code
14463
Pack
Bag 20 Kg

Available Options


Description

MasterFlow 700 is a ready-to-use pumpable, natural aggregate, general purpose grout which undergoes controlled expansion in the plastic state. MasterFlow 700 is a Class A grout as defined by AS 1478.1-2000, Appendix E, section E5.1. MasterFlow 700 may be placed in dry (damp) packed, plastic or fluid consistency and is generally used in applications requiring a grout thickness between 10mm and 100mm.

Recommended Uses

All general purpose grouting operations with clearances of 10mm to 100mm including:

  • Non-critical column and equipment bases.
  • An in-fill grout for cavity block walls.
  • In Caulking of joints and pipes.
  • Between and under pre-cast panels and other joints where total load bearing is not required
  • Underpinning where a grout similar in appearance to concrete is required.

Features And Benefits

  • Ready to use - premixed grout requires only the addition of mixing water on site.
  • Low water/cement ratio - reduces drying shrinkage and increases durability.
  • Damp packable - can be applied without slumping.
  • Complete void filling - resulting from controlled fluid-phase expansion.
  • Non staining grout - similar in appearance to plain concrete.
  • Economical - relatively low in-place cost due to its ease of use and flowable properties.
  • No added chlorides – does not contribute to chloride load.
Tech Data Sheet
Tech Data Sheet
Safety Data Sheet
Safety Data Sheet


If you have any questions please ask us
Subscribe to our newsletter