Fosroc - Renderoc FC
Polymer modified fairing mortar, to cover surface imperfections, (0mm to 3mm thickness)
Item Code
2360
Pack
Bag 15 Kg
Polymer modified fairing mortar, to cover surface imperfections, (0mm to 3mm thickness)
Renderoc FC cementitious fairing coat is designed for application in thin layers to produce a fair-faced appearance to concrete surfaces or masonry surfaces in readiness to receive a protective/ decorative coating.
Surface imperfections up to 3mm in depth can be filled with the scrape coat application. Voids of greater depth should be separately filled as a prior operation, again limiting the Renderoc FC material thickness to 3mm. Renderoc FC can be used independently to infill surface imperfections and voids or to render large sections of concrete or masonry at up to 3mm thickness. It can also be used in association with other Renderoc mortars. Under normal conditions, the product does not require an independent primer or curing membrane.
Renderoc FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar.
The material is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics, while minimising water demand.
The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings.
