Surface Cure A

  • Surface Cure A

SURFACE-CURE A- WATERBASED CURING COMPOUND is a Class D, Type 1 curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.

Pack
20L, 205L, 1000L

Available Options

SURFACE-CURE A- WATERBASED CURING COMPOUND is a Class D, Type 1 curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.

SURFACE CURE A can also be generally classed as a Class Z, Type 1 it comes back to interpretation of definitions.

The polymer used is a synthetic acrylic and can fit in both class descriptions.

SURFACE-CURE A, cures, seals, and hardens the surface of new concrete, providing increased strength and durability and improved resistance to chemicals and surface dusting, when applied by the correct method and at the recommended application rate.

The dried film, which is not particularly obvious and has minimal darkening on exposure to sunlight.

SURFACE-CURE A is based on an acrylic resin combined with other additives.

 

Use

Mainly used on freshly laid concrete floors, carparks, warehouses, bridge ramparts etc.

Also used for curing vertical concrete areas immediately after the stripping of forms to assist strength development, improve chemical resistance, etc.

 

Advantages

  • Environmentally acceptable.
  • Low Solvent - water based (not classed as Hazardous or Dangerous) Low VOC
  • Complies with GREEN STAR- OFFICE DESIGN V3 IEQ-13 ( <200g/L TVOC)
  • Low odour.
  • No ventilation requirement.
  • No stringent safety requirements.
  • Fast dry
  • Efficient curing of the concrete assists the Development of strength, abrasion resistance and durability.
  • Reduces the likelihood of cracking or dusting at the surface.
  • Easy to use, eliminates messy water curing or polythene film.

Coverage

5m2/L ( 0.2litres/m2 ) using a spray applicator – do not brush.

Code Item Pack
21625 Surface Cure A 20L 20L
20024 Surface Cure A 200L 200L
20025 Surface Cure A 1000L 1000L

The coating should be applied in a single coat to achieve the required dry film thickness sufficient to achieve the correct curing properties, SURFACE CURE A must be applied on to the substrate at the coverage rates recommended.

Tech Data Sheet
Technical Datasheet


If you have any questions please ask us
Subscribe to our newsletter