Avista Internal Flooring Epoxy - Two Part

  • Avista Internal Flooring Epoxy - Two Part

2 Pack epoxy floor coating system that is solvent free when used as a clear un-pigmented coating or binder


Available Options

Description

A high quality 2 Pack epoxy floor coating system that is solvent free when used as a clear un-pigmented coating or binder. It consists of a Part A Resin and Part B Hardener.

Uses

  • A heavy duty clear or pigmented coating for concrete andn polished concrete floors. Highly resistant to chemical attack and pedestrian or vehicular traffic.
  • Can be used in conjunction with graded aggregates ton produce durable decorative floor finishes.
  • FOR INTERIOR USE ONLY.

Advantages

  • Long lasting and easily maintained with good resistancen to a wide range of domestic and commerial chemicals.
  • Solvent free when used as a clear un-pigmented coatingn or binder.
  • Outstanding water resistance.n  Resistant to most chemicals.

Properties

Viscostity @ 25°C Low  (<1,000 cps)
Gel Time (@ 20°C, 65% R.H.) 25-35 minutes
Dust Free Time @ 20°C, 65% R.H). 8 hours
Cure Time (@ 20°C, 65% R.H.) Approx. 10-12 hours
VOC Content: 50 gms per litre Untinted 64 gms per litre

(when mixed with Avista Internal Flooring Colour Tint)

Chemical properties

Resistant to a wide range of chemicals. Resistance to spillages (examples only).

  • Toluene
  • Acetic Acid 5%
  • Sodium Hydroxide 30%
  • Ammonia 20%
  • Used sump oil
  • Hydrochloric Acid
  • Sulphuric Acid 30%
  • Skydrol
  • Sodium Chloride
  • Kerosene
  • Petrol
  • Lactic Acid 5%
  • C41 (Kodak) chemistry
  • Ajax Liquid Gel (clear)
  • Vegetable oils

Surface staining may result from exposure to some aggressive chemicals.
Good housekeeping practice requires spills to be quickly removed and washed.

Limitations

  • Discolours after prolonged exposure to UV sunlight.
  • Suitable for INDOOR USE ONLY.
  • Prone to scratching. To reduce this, add SRA Slipn Reducing Additive or over-coat with Avista Polyurethane Sealer.
  • Not recommended for use below 10°C or above 35°C.
  • Ensure surface to be coated is dry. Moisture can causen blooming and delamination.  Short pot life, approximately 25 minutes.

Application

NOTE: for Flake Flooring application instructions, see Avista Decorative Flake System TDS.



If you have any questions please ask us
Subscribe to our newsletter