NuTech NuPool Epoxy

• 2 Pack Product
• Coloured
• Durable
• Reduces Organic Growth
• Waterproof

Description:

NuPool Epoxy is a high-build, isocyanate-free gloss epoxy coating designed for long-term protection of concrete and fibreglass pools. It’s tough; the water-impervious formula is ideal for both new surfaces and for recoating aged, two-pack epoxy-coated pools. Whether you’re working on residential or commercial pools, this product offers a sleek finish with reliable performance.

Formulated for strength and durability, NuPool Epoxy provides outstanding resistance to abrasion, scuffing, and waterborne chemicals. It also protects against fatty oils, alkalis, acids, and efflorescence. These features make it a popular choice for professionals looking for a long-lasting and cost-effective pool coating.

This epoxy system is suitable for bare concrete, fibreglass, or surfaces previously coated with compatible two-pack epoxy. It’s easy-to-apply, self-priming formula bonds well with prepared surfaces, delivering a smooth and glossy result that stands up to everyday use.

Available in 10 standard colours, NuPool Epoxy allows for design flexibility while enhancing both appearance and durability. Its finish not only improves the look of worn pool interiors but also helps reduce ongoing maintenance.

For best results, pair this product with proper surface preparation and cleaning. You can find more guidance within the NuTech Pool Coatings range, which includes a full suite of pool protection solutions.

If you’re looking to revive a tired pool or protect a new one, this epoxy system offers a high-performance, professional-grade finish that lasts.

Benefits:

• Isocyanate Free
• Excellent adhesion
• Excellent hardness
• Outstanding chemical resistance
• Hard-wearing
• High resistance to corrosion and abrasion
• Will resist bacterial growth
• Easy application by brush, roller or spray

Application:

• Brush or Roller (see TDS for spray application)
• Pressure washer and vacuum cleaner
• Drop sheets, cardboard or old tarps

Preparation:

• Degrease the entire pool with EcoSafe Degreaser
• Pressure clean the whole pool with a >2000psi pressure washer
• Ensure all stains, oil and chemical residue are removed. Repeat the cleaning process if needed
• For bare concrete, etch the surface using EcoSafe Etch and rinse well
• For old or existing 2-pack epoxy surfaces, sand or abrade the entire surface
• Make any spot repairs to cracks or chips
• Vacuum the entire pool with a soft-bristle head. Ensure that all debris has been removed.
• Create a safe mixing area near the pool with drop sheets, tarps or cardboard.

Coat One:

• Mix the first coat of NuPool Epoxy using the 3:1 ratio (2-part kit) by adding NuPool Epoxy Part B into NuPool Epoxy Part A
• Mix the two parts thoroughly using a drill mixer
• Add EPiC Epoxy 500 Thinner (approx 20%) and mix again
• Allow the paint to stand for 10 minutes before application
• Use a brush to cut in all edges and corners with NuPool, then roll to cover the surface
• Allow drying for 5 hours (temperature dependent) before applying the second coat
• DO NOT wait more than 72 hours before applying a second coat

Coat Two:

• Mix the second coat of NuPool Epoxy using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part A
• Mix the two parts thoroughly using a drill mixer
• Allow the paint to stand for 10 minutes before application
• Use a brush to cut in all edges and corners with NuPool Epoxy, then roll to cover the surface
• Allow drying for 5 hours (temperature dependent)

Non-Slip:

To create a non-slip surface, apply Nutech Coarse Anti-Slip to the second coat while still wet. If anti-slip has been applied, use a third coat of NuPool Epoxy over the areas.

Curing:

NuPool Epoxy takes seven days to cure into a hard and durable surface completely. During this time, the pool must be kept dry. If the surface becomes wet, remove all water and allow it to continue curing.

Suitable Surfaces:

• Concrete Pools
• Fibreglass Pools

Warnings:

• Do not allow degreaser or etch to dry on the pool surface. This may cause adhesion issues.