NuTech EcoSafe Strip Industrial
High-strength, non-caustic & biodegradable remover for industrial and commercial paint, sealers, & coatings.
Pack
1L, 4L, 15L
High-strength, non-caustic & biodegradable remover for industrial and commercial paint, sealers, & coatings.
EcoSafe Strip Industrial Paint Stripper is a high-strength, non-caustic, biodegradable remover for industrial and commercial paint, sealers, and coatings. Designed for maximum effectiveness on a wide range of surfaces and coatings.
EcoSafe Strip Industrial Paint Stripper is engineered to provide safe and efficient removal of tough coatings such as acrylics, epoxies, polyurethane, and adhesives from surfaces including concrete, brick, masonry, timber, and metal. Its non-caustic, biodegradable formula is suitable for both indoor and outdoor projects where safety and environmental impact are a priority.
This powerful paint stripper is ideal for stripping floor coatings, industrial linemarking, graffiti, and failed or incompatible sealers—especially on porous or rough-textured surfaces where solvent-based removers may fail.
EcoSafe Strip Industrial offers outstanding performance on industrial, commercial, and residential projects where aggressive removal is required without harsh fumes or residue.
| Appearance | Viscous white liquid |
| pH | 11.5 |
| VOC Levels | 8% |
| Coverage Rate | 1 – 3 m²/L |
Preparation: Mask or cover all areas not to be stripped. Ensure good ventilation for indoor jobs. Remove loose or flaking paint before application. Test on a small, inconspicuous area for substrate suitability and dwell time.
Application: Stir product thoroughly before use. Apply a thick, even coat using a brush, roller, or airless sprayer. Allow the product to penetrate and lift coatings—dwell time may range from 30 minutes to several hours, depending on the type and thickness of coating. Remove softened paint/coating with a scraper, wire brush, or high-pressure water wash. Repeat as needed for stubborn coatings. Rinse thoroughly with clean water.
Clean Up: Clean tools and equipment with water immediately after use. Dispose of waste in accordance with local environmental regulations.
