Vexcolt - VX Savior Multi - EP

Two-component, solvent-free epoxy system designed as a versatile liquid binder for crack injection


Available Options

VX Savior Multi-EP

VX Savior Multi-EP is a two-component, solvent-free epoxy system designed as a versatile liquid binder. It performs as a structural crack injection resin, primer for waterproofing and flooring systems, and can be combined with fillers to form high-strength epoxy paste for repairs. Suitable for both damp and dry surfaces, it offers excellent adhesion and high mechanical performance.


Uses

Suitable for the following applications:

  • Structural crack injection (damp or dry surfaces)
  • Concrete priming before VX Guardian waterproofing systems
  • Segmented bonding concrete & sealing cracks (with filler)
  • Rapid structural repair of concrete
  • Steel bonding
  • Epoxy paste formulation (with fillers)
  • No dilution required

Features & Benefits

  • Multi-purpose epoxy binder
  • Suitable for damp and dry surfaces
  • Solvent-free, low VOC
  • Low viscosity for crack injection and easy priming
  • Cures hard between 4°C – 35°C
  • High mechanical strength

Technical Properties

Compressive Strength (7 days)93 MPa
Flexural Strength (7 days)35 MPa
Tensile Strength (7 days)62 MPa
Compressive Strength (24 hrs)55 MPa
Heat Deflection Temperature80°C
Compressive Modulus3.4 GPa
Bond Strength> 2.5 MPa (concrete failure)
Abrasion Resistance (ASTM C779)0.24 mm / 30 mins
Mortar (A+B+Filler) Compressive Strength64 MPa
Mortar (A+B+Filler) Tensile Strength36 MPa

Application Process

Surface Preparation & Mixing

  • Concrete must be fully cured (28 days).
  • Remove dust, dirt, grease, efflorescence and loose materials.
  • Ensure substrate is strong and cohesive.
  • Repair spalling or honeycombed concrete with VX Savior Multi-EP mortar.
  • Mix components for 4–5 minutes using a mechanical mixer.
  • Apply using a notched trowel or rubber lip.
  • Typical consumption: 200–300 ml/m².
  • Mix only what can be applied within 30 minutes.

Application

  • Inject into cracks using standard epoxy injection equipment.
  • Use as primer before VX Guardian waterproofing (150–200 ml/m²).
  • For highly absorbent surfaces, consumption increases.
  • Mix with fillers to create epoxy repair paste.
  • Suitable for concrete–steel or concrete–concrete bonding.
  • Can be used to seal cracks prior to injection.

Curing

Curing time depends on temperature, applied volume and filler addition. Full cure occurs in approximately 7 days at 23°C.



If you have any questions please ask us
Subscribe to our newsletter